Bosch PowerPacks
First and second generation, recell, CAN communication, chargers
PowerPack 400/500 (second generation)
It is possible to transfer BMS between these batteries if done carefully. Take care that the powe...
PowerPack Classic 300/400
10S4P, straightforward, but has a nasty flex sense harness that must be handled with extreme care...
PowerTube 500/625
They have the same BMS. BMS swapping is possible and easy - more difficult if from 500 to 625 or ...
E-bike Vision Classic 458
10S5P design, 13 Ah -> 458 Wh 11 T15 screws hold it together. No flaps. Strong plastics! It has...
Bosch charger hack
Performance Classic The middle pin is the 5V.
Producing the Bosch-compatible charging plug
Solder the middle ones first, so it will not move out of alignment. Do not solder two pins o...
Battery enabler
We need to build a simplified version of this: https://www.seeedstudio.com/CANBed-FD-Arduino-CAN...